SK | SideKick | Dry Fluid Cooler
SK | SideKick

The Hydron Module SideKick Dry Fluid Cooler can function by itself or with a ground loop system. Designed for installation outdoors, the fluid cooler is the solution for closed ground loop systems in cooling-dominant climates and for stand-alone water-source heat pumps. When coupled with a ground loop, the SideKick removes the surplus of heat from the loop fluid for increased efficiencies. The Sidekick can fit a variety of needs for structures such as military bases, residential developments, office buildings, and more.

FEATURES
  • Capacity: 3.5 - 5 tons
  • Voltages: 208-230/60/1
  • All-aluminum microchannel air coil
  • Optional freeze protected flow switch
  • ECM blower motor
  • Heavy gauge steel
  • Internal pump optional
Model Specifications:
  • Capacity Heat Rejection Capacity1
    BTUH
    CAir Temp. into Fluid Cooler2(DB)
    F
    Air ΔT
    F
    Water Flow Rate
    GPM
    Water Temp. into Fluid Cooler
    F
    Water ΔT through fluid cooler
    F
    Approach Temperature3
    F
    3-ton 37,300 70° 13° 9 90° 11.7
    37,900 90° 13° 9 110° 11.6°
    38,300 105° 13° 9 125° 11.5°

    Notes:
    * Air flow is set at 2,650 SCFM for the 3-ton
    1. DSH is turned off, the heat rejection capacity is the capacity of the fluid cooler. The fluid cooler can mitigate a major proportion of heat load
    2. The fluid cooler can handle the heat load at very hot ambient temperature
    3. Approach temperature is defined as the temperature difference between leaving water temp and entering air temp of the fluid cooler.
    * This table shows a limited range of performance data. Consult technical documentation for the complete range of data.

  • Capacity Heat Rejection Capacity1
    BTUH
    Air Temp. into Fluid Cooler2(DB)
    F
    Air ΔT
    F
    Water Flow Rate
    GPM
    Water Temp. into Fluid Cooler
    F
    Water ΔT through fluid cooler
    F
    Approach Temperature3
    F
    5-ton 71,600 70° 19° 15 90° 10° 11.5°
    72,300 90° 19° 15 90° 10° 10.4°
    73,000 105° 19° 10 125° 10° 10.3°

    Notes:
    *Air flow is set at 3,500 SCFM for the 5-ton
    1. DSH is turned off, the heat rejection capacity is the capacity of the fluid cooler. The fluid cooler can mitigate a major proportion of heat load
    2. The fluid cooler can handle the heat load at very hot ambient temperature
    3. Approach temperature is defined as the temperature difference between leaving water temp and entering air temp of the fluid cooler.
    * This table shows a limited range of performance data. Consult technical documentation for the complete range of data.

We offer many optional accessories for each of our geothermal units:

See Our Systems In Use

View a few of our past projects to see GeoComfort Geothermal systems in real-life applications.
Hydron Module Geothermal Systems
by Enertech Global, LLC
2506 S Elm Street
Greenville, IL 62246