Each Hydron Module heat pump is built to last with the high efficiencies for incredible comfort and cost-savings. To give you an idea of what goes into each system, we've put together a list of features that are found in most of our systems. Each feature is not in every product, because features are determined based on the needs the products meets.
The size of the system required for home and buildings depends on the size of the conditioned space, insulation values, window type, etc. This size of the geothermal system is determined by doing a Manual J calculation, which is something the installer takes care of.
The safety features of Hydron Module units include microprocessor controls that function to protect the unit if something were to go awry. Safety is also taken into account throughout the lifetime of a Hydron Module Geothermal System. Our products are ETL certified to UL and CSA standards.
Many Hydron Module Geothermal Systems come standard with hot water assist. The geothermal heat pump will use excess heat to assist with heating a home or building's hot water, resulting in 25% - 40% savings on hot water annually.
All of our geothermal systems are ENERGY STAR certified, qualifying them for many incentives. Geothermal heat pumps cooling efficiency is rated by Energy Efficiency Ratio (EER) and heating efficiency is measured by Coefficient of Performance (COP). The federal EER minimums range from 17.1 - 21.1, and the COP minimums range from 3.1 - 4.1. The minimums are dependent on the type of geothermal unit. Hydron Module Geothermal Systems are AHRI certified to ISO standards, which means they meet further high efficiency standards and are produced in an environmentally-conscious manner.
There are Hydron Module geothermal models that come with an all-aluminum microchannel air coil. This improves heat transfer for increased efficiencies and lower operating costs, helps increase the system's lifespan, and enhanced structural integrity means less chance of damaging the coil during basic maintenance like a filter replacement.
A variable speed fan provides the ultimate in comfort, allowing the fan to adjust based upon compressor speed, and even humidity levels while cooling (when equipped with a humidistat). In addition, for homes where constant fan (continuous air circulation) is beneficial, a variable speed fan operates at a much lower speed, which provides circulation and filtration at a much lower sound level.
Hydron Module Geothermal Systems are built to last with heavy gauge steel. The panels can be removed easily for installation and maintenance.
Hydron Module’s exclusive UL GREENGUARD Gold certified cabinet insulation makes the geothermal system incredibly quiet.
A unit's compressor type depends on the needs it was created to meet. Hydron Module Geothermal Systems are built with a variable-speed, two-stage, or single-stage compressor.
As part of the safeties that come standard with Hydron Module Geothermal Systems, an air coil temperature sensor protects the system in the event the filter is blocked or the fan motor stops working. Additionally, with the variable-speed water-to-water, an outdoor ambient sensor provides temperature feedback, enabling the variable-speed water-to-water to use the lowest possible water temperatures; this eliminates temperature swings and increases your home or building's comfort.